Galaxy S2 I9100 Receives Official Android 4.1.2 VJMS4 Jelly Bean OTA Update [How to Install Manually]

Galaxy S2 I9100 Receives Official Android 4.1.2 VJMS4 Jelly Bean OTA Update

Galaxy S2 GT-I9100 recently received its latest Jelly Bean Over-The-Air (OTA) update from Samsung via Android 4.1.2 VJMS4 official firmware. The firmware is currently available for download as OTA update as well as through Samsung KIES in select countries including Brazil.
However, those who missed the twin opportunities and those residing outside the supported countries can still download and install the same manually (provided the device is unlocked), using our step-by-step guide. NOTE: The installation of this OTA update does not require ClockworkMod recovery (CWM) or a rooted Galaxy S2 phone, as it can be installed manually via ODIN flash tool.
Android 4.1.2 VJMS4 Jelly Bean Official Firmware
PDA: I9100VJMS4
CSC: I9100ZTAMS4
Version: 4.1.2
Date: May, 2013  

 Key Points to Note

• Android 4.1.2 VJMS4 official firmware and the instructions provided in this guide are applicable to the Galaxy S2 GT-I9100 model only. Do not attempt installing this firmware on any other device, as it may inadvertently damage or brick the device. Verify your device's model number by navigating to Settings > About Phone.
• Back up your important data and settings on the phone including contacts, messages, photos, videos, MMS and APN settings to an external SD card to prevent data loss while performing any data wipe task during or after firmware installation.
• Ensure the phone has at least 80% battery charge to prevent unexpected device shutdown (due to battery drain) during or after firmware installation.
• Verify that correct USB drivers for the phone are installed on computer (download Samsung Galaxy S2 GT-I9100 USB drivers)
• Ensure USB debugging mode is enabled on the phone to facilitate data transfer between phone and computer via USB cable. To enable USB debugging mode, navigating to Settings > Developer Options (if device is running Android 4.0 or later) or Settings > Applications > Development (if device is running Android 2.3 or earlier). If the phone is running Android 4.2, perform the following steps:
• Go to Settings > About Phone
• Scroll to the bottom of the screen and select Build Number
• Tap the phone's Build Number seven times to unlock or reveal the hidden Developer Options under Settings. Then select the checkbox to enable USB debugging mode under Settings > Developer Options.
• Ensure the device is factory unlocked (not locked to a specific carrier) and its bootloader is unlocked.
• The installation of the firmware requires ODIN flash tool, which is designed to work on Windows OS only. Linux and Mac OS users should use CrossOver Utility to run ODIN on their computer.
• Instructions provided in this guide are meant for reference purpose only. IBTimes UK will not be held liable if the device is damaged or bricked during or after firmware installation. Users are advised to proceed at their own risk.

Downloads

• Android 4.1.2 VJMS4 Jelly Bean firmware for Galaxy S2 I9100
• Odin v3.07

How to Update Galaxy S2 GT-I9100 on Official Android 4.1.2 VJMS4 Jelly Bean Firmware

Galaxy S2 I9100 Receives Official Android 4.1.2 VJMS4 Jelly Bean OTA Update

Step 1: Extract the firmware zip file to the desktop to get a .tar.md5 file and some other files (optional).
Step 2: Extract Odin zip file to obtain Odin3 v3.07.exe along with few other files.
Step 3: Power off the phone and wait for vibration (about 5-6 seconds) to confirm complete device shutdown. Now boot the phone into Download Mode by pressing and holding Volume Down, Home and Power button together until a construction Android robot icon with a triangle appears on screen. Then hit Volume Up button to enter Download Mode.
Step 4: Launch Odin3 v3.07.exe that you obtained in Step 2 as an Administrator, as Admin privileges are required to complete the firmware installation process smoothly.
Step 5: Connect your phone to computer via USB cable. When the device connects successfully, the message saying "Added!" appears in ODIN and the ID: COM box will turn yellow with the corresponding COM port number. If the message fails to appear, try reinstalling the phone's USB drivers or changing the port on the computer.
Step 6: Choose the following files from I9100VJMS4 folder that you obtained in Step 1 in Odin using respective checkboxes:

• Select the PDA checkbox, and click the .tar.md5 file
• Tap the Phone checkbox, and select the file named 'modem' (ignore if such file is not found)
• Choose the CSC checkbox, and click the file named 'CSC' (ignore if there is no such file)
• Click the PIT checkbox, and choose the '.pit' file (ignore if the file is missing)

Step 7: In Odin, enable Auto Reboot and F. Reset Time options by selecting the checkboxes. But the Re-Partition checkbox must be selected only if a .pit file was chosen in the previous step in ODIN.
Step 8: To prevent ROM related errors, verify Step 6 and Step 7 are done correctly. Then hit the START button to begin flashing the firmware.
Step 9: Once the firmware installation is complete, the phone will reboot automatically and soon a PASS message with green background appears in the left-most box at the very top of Odin. Now it is safe to disconnect the USB cable to remove the device from computer.
The Galaxy S2 GT-I9100 is now running on the latest Android 4.1.2 VJMS4 Jelly Bean OTA firmware. Go to Settings > About Phone to verify the firmware installed.
Troubleshooting:
If the phone is stuck at boot animation or Samsung logo after Step 9, then go to recovery mode (press and hold the Volume Up, Home and Power buttons together) and perform Wipe data/Factory Reset as well as Wipe Cache Partition before choosing reboot system now option. Use Volume keys to navigate between options and Power key to select an option in recovery. Please note that performing data wipe task will only erase your phone's internal memory and not the data on SD card.
[Source: Droid Firmwares]

How to Update HTC HD2 with Android 4.1 Jelly Bean Firmware

HTC HD2 is one of those phones, feed anything and it will happily run the OS. This time, Android 4.1 Jelly Bean is now available for the HTC HD2. This is obviously not an official ROM by any means. It is developed by a third-party developer. Jelly Bean for HD2 is in an early stage with lots of features and options not working.
In this tutorial, we will tell you how to install Android 4.1 Jelly Bean on HTC HD2 with complete step-by-step guide. First, you will need to take care of some per-requisites like backing up your phone etc.




Disclaimer: All the tools, mods or ROMs mentioned below belong to their respective owners/developers. We (TeamAndroid.com) or the developers are not to be held responsible if you damage or brick your device. We don’t have you on gun point to try out this tutorial

Working:

• Mobile Data 3G/2G
• Calls
• WiFi
• Bluetooth
• SMS
• Sound check download page for fix
• Video Playback
• USB Mass Storage

Not Working:

• Camera
• Browser works but display is messed up.
• Error when Installing some Apps
• Google Now crashes.

Make sure you have installed all your USB drivers for the HTC HD2 to connect it with the computer. Apart from just the USB drivers, there are a few more things that you need to take care of. The following options are mainly for if your HTC HD2 is on Android.

1. You need to enable USB debugging mode. This helps to connect your Android phone with the PC. See here: How to Enable USB Debugging.

2. Your phone battery should be 80-85% charged. If your phone goes off suddenly because of battery, during flashing ROMs or installing mods and updates — your phone might go dead permanently. See here: How to Check Battery Percentage.

3. Backup all your important data that you might need as soon as your flash a new ROM, or make a backup for just in case, you never know when anything might go wrong. See below on how to backup data:

• Backup your SMS messages. How? –> How to Backup/Restore SMS Messages.
• Backup Contacts, Gmail and Google Data. How? –> Sync with Google Sync.
• Backup Call History. How? –> How to Backup Call History.
• Backup WhatsApp Messages. How? –> How to Backup/Restore WhatsApp Messages.
• Backup APN Settings: GPRS, 3G, MMS Settings.

4. Your phone should be factory unlocked. Additional instructions for locked Android devices will be added in the tutorial for unlocking devices.
Now, let’s proceed with the tutorial on the next page and update HTC HD2 to Android 4.1 Jelly Bean custom ROM.


link

Galaxy S2 GT-I9100 Receives Android 4.1.2 XWLSU Jelly Bean OTA Update [How to Install and Root]

Another official Over-The-Air (OTA) update, Android 4.1.2 Jelly Bean with base firmware XWLSU, has been released for Samsung's second generation Galaxy S series smartphone bearing model number GT-I9100. The new official build is for Orange subscribers in various countries such as Romania, Austria, France, Poland and Spain.

Android 4.1.2 XWLSU Jelly Bean update is available for Galaxy S2.

 Firmware details
PDA: I9100XWLSU
Version: Android 4.1.2

Regions: Austria, Belgium, France, Germany, Hungary, Italy, Spain and United Kingdom
This is a carrier branded firmware and like other branded official firmware the latest build is not available over Samsung Kies. Users can connect the device to Wi-Fi and find the OTA update by navigating to Settings>> About device>> Software update.
   
Those who fail to find the OTA update for being region-specific may follow our step-by-step guide to install Android 4.1.2 XWLSU Jelly Bean manually using Odin flashing tool.

IBTimes UK reminds its readers that it will not be held liable for any damage to the device. Users are also advised to verify that their handsets meet the following requirements.

Pre-requisites

1) Install USB Driver for Samsung Galaxy S2 to connect the Android device with the computer.
2) Enable USB Debugging Mode on the phone to connect it with the computer and use Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and ensure the USB Debugging Mode is turned on.]
3) As the tutorial might wipe out all data of the phone, create a backup. If the device is having any custom recoveries such as CWM/TWRP already installed then backup data using the recovery.    
4) The battery of Galaxy S2 should have above 80% charge.
5) The device should be factory unlocked and not locked to a particular carrier.
6) The phone will lose custom ROM with the installation of official firmware. Additionally, it will lose custom recovery such as ClockworkMod/TWRP which will be replaced by stock recovery.
7) The device will no longer belong to a rooted version with the installation of official firmware.
8) The Android 4.1.2 XWLSU Jelly Bean works only on Samsung Galaxy S2 GT-I9100. As flashing this on any other variant might brick the device, verify the model number of Galaxy device by navigating to Settings>> About Phone>> Model number.

Steps to install Android 4.1.2 XWLSU Jelly Bean on Samsung Galaxy S2 GT-I9100 

Step-1: Download Android 4.1.2 XWLSU Jelly Bean official update for Samsung Galaxy S2 to the computer
Firmware download links: Android 4.1.2 XWLSU Jelly Bean (Poland)/ Android 4.1.2 XWLSU Jelly Bean (Spain) / Android 4.1.2 XWLSU Jelly Bean (France) / Android 4.1.2 XWLSU Jelly Bean (Austria) / Android 4.1.2 XWLSU Jelly Bean (Romania)  

Step-2: Extract the downloaded zip file to get a file with .tar.md5 extension along with few other files

Step-3: Download Odin v3.07 which will help to install the Jelly Bean firmware on the phone. Extract the Odin zip file to get Odin3 v3.07.exe file with some other files

Step-4: Switch off the Galaxy S2. Now place the phone in Download Mode by pressing and holding the Volume Down and Home buttons together while pressing the Power button. A warning screen will appear, now press the Volume Up button to continue to enter Download Mode   

Step-5: Run Odin3 v3.07.exe as an Administrator on the computer

Step-6: Connect the Galaxy S2 to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the device. When the phone is connected, a message saying Added will appear under Odin's message box. Also, the successful connection will be indicated by the ID: COM box in Odin turning yellow with the COM port number

Note: If the Added message does not appear, then try the USB port at the back of the computer. In case that too does not work, then re-install USB driver.  

Step-7:  Select these files extracted from I9100XWLSU folder to install on the phone
a) Click the PDA button and select the .tar.md5 file
b) Click the Phone button and select file with Modem in its name
c) Click the CSC button and select file with CSC in its name
d) Click the PIT file and select the .pit file   

Step-8: Ensure the Auto Reboot and F.Reset Time checkboxes are selected in Odin window. But uncheck the Re-Partition option, select it only when a .pit file is being used

Step-9: Double check everything and click the Start button in Odin. The installation process should begin now and would take few minutes to complete

Step-10: Upon the completion of the installation process, the phone will restart automatically. And soon a PASS message with green background will appear in the extreme left box at the very top of Odin indicating successful installation. When the home screen appears on the phone, unplug the USB cable from the device to disconnect it from the computer

Samsung Galaxy S2 should be now updated with Android 4.1.2 XWLSU Jelly Bean official firmware. Navigate to Settings>> About Phone to verify the new software version running on the device.      
Fix bootloop issue 

If the Galaxy S2 gets stuck at booting animation (after step-10), then put the phone into recovery mode by pressing and holding Volume Up, Home and Power buttons together. Now perform data wiping task by selecting Wipe data/factory reset, and then select Wipe Cache Partition. Once the action is completed, return to the main recovery menu and reboot the phone by selecting reboot system now. In recovery mode, use Volume keys to navigate between options and the Power button to select the desired option. Performing data wiping task will erase the internal memory data of the device.       

Those who have already installed Android 4.1.2 XWLSU Jelly Bean on their devices, may follow our step-by-step guide to root the same.

Steps to root Samsung Galaxy S2 GT-I9100 on Android 4.1.2 XWLSU Jelly Bean 

Step-1: Download Rooted Speed Kernel for Samsung Galaxy S2 to the computer
File name: speedmod-kernel-s2-jb-k5-3-Odin.tar    

Step-2: Download Odin 3.07 and extract the downloaded zip to get Odin3 v3.07.exe along with few other files

Step-3: Switch off the Galaxy S2 and wait for about five to six seconds to confirm complete power off

Step-4: Boot the phone into Download Mode by pressing and holding Volume Down and Home buttons together while pressing the Power button. A warning screen will appear, then press the Volume Up button to enter Download Mode   

Step-5: Run Odin3 v3.07.exe as an Administrator

Step-6: Connect the Galaxy S2 to the computer while it is in the Download Mode

Step-7: In Odin, click the PDA button and select speedmod-kernel-s2-jb-k5-3-Odin.tar file

Step-8: Verify that the Auto Reboot and F.Reset Time checkboxes are selected in Odin window. But uncheck the Re-Partition option

Step-9: Finally, click on the Start button in Odin to begin the installation

Step-10: Once the installation process is completed, the phone will reboot and soon a PASS message with green background will appear in the extreme left box at the very top of Odin. When the home screen appears on the phone, disconnect the device from the computer

Samsung Galaxy S2 running on official Android 4.1.2 XWLSU Jelly Bean should now be rooted successfully. Users may now install any app that requires root permission.
Click here for tutorial to install Android 4.1.2 XWLSW Jelly Bean on Samsung Galaxy S2 I9100.

source

Cara Mudah WhatsApp-an di PC atau Laptop

WhatsApp? yup siapa yang belum tau WhatsApp? sebuah aplikasi mobile untuk chat. hanya dengan cara tukeran nomer HP udh bisa langsung terhubung, tanpa perlu PIN atau ID. tinggal masuk ke applikasinya bisa langsung OL, tanpa ID dan password.

Sampe sekarang, WhatsApp masih diperuntukkan untuk device yang kecil2 seperti HP dan tablet. baru bisa untuk iphone, android, blackberry, nokia symbian, dan windows phone.

Tapi ada yang menarik ni jal. WhatsApp bisa dijalankan di PC atau laptop. zen (keren) kan ? simak caranya baik2 ya.

1- Download YouWave-Android dulu dari link berikut (sekitar 95 MB):

via Mediafire | via Nextwapp

2- Download applikasi WhatsApp untuk andraid disini (kira2 8 MB).

3- Install Youwave android V.1.5.1 di PC atau Laptop.

4- Setelah Youwave androidnya terinstall, copy and paste file WhatsApp ke C:\Users\(Nama User ente)\youwave\android apps.

5- Jalankan Youwave android, dikolom applikasi akan muncul ikon WhatsApp. klik aja 2X untuk menjalankan.

klik gambar untuk memperbesar

6- Done.

source

Sygic GPS Navigation 13.1.1 Full Version (Android)

Sygic GPS Navigation 13.1.1

 merupakan update terbaharu yang dikeluarkan pada 22 April 2013. Update ini tidak melibatkan sebarang perubahan yang ketara berbanding versi 13.1.0 yang saya kongsikan sebelum ini. Anda boleh memilih samada untuk upgrade atau sebaliknya. Panduan dan langkah untukupgrade dan new installation telah saya sediakan di bawah.

Sygic GPS Navigation

Ciri – Ciri Terbaharu Sygic GPS Navigation 13.1.1

Turn your app into an impressive travel guide with brand new SYGIC PLACES!

• Travel smarter with POIs from cool providers
• TripAdvisor POIs with ratings and reviews
• Best hotels & restaurants right in your app
• 25 cities worldwide & more on the way
• Also available: Booking.com, Hotels.info
• Free download in My Sygic, so go get them!

Sumber : Google Play

Sygic GPS Navigation 13.1.1

Cara Memasang Sygic GPS Navigation 13.1.1

PERHATIAN : Sila baca, fahami dan ikuti panduan dan arahan di bawah dengan teliti. Pihak admin tidak akan memberikan sebarang respons berulang sekiranya jalan penyelesaian dan arahan telah dinyatakan dengan jelas menerusi post dan ruangan komen. Harap maklum.

1. Upgrade / Update

PERHATIAN : Langkah ini sesuai bagi mereka yang telah memasang Sygic GPS Navigation 13.1.0.

• Muat turun dan Extract Sygic GPS Navigation 13.1.1 apk.
• Install dan anda akan diminta untuk Replace application.

Replace Application

• Tunggu sehingga proses Download Resources selesai

Downloading Resources

• Run

2. New Installation / Fresh Install

NOTA : Langkah ini sesuai untuk pengguna yang pertama kali menggunakan aplikasi Sygic ataupun kepada mereka yang berhadapan dengan masalah mengikuti langkah upgrade / update di atas.

1. Uninstall kesemua aplikasi Sygic yang terdapat di smartphone anda dan pastikan tidak wujud sebarang folder Sygic di internal mahupun externalstoran. (Kegagalan berbuat demikian boleh menyebabkan proses pemasangan tidak sempurna)
   
2. Restart smartphone anda.
3. Download : File Sygic
4. Extract dan pindahkan fail Sygic ke Internal storage smartphone anda
5. Download, Extract dan Install aplikasi Sygic GPS 13.1.1 apk.
6. Run Sygic.

NOTA : File Sygic di atas telah dilengkapi dengan map Malaysia 2012.10(latest) dan tidak ada lagi isu BUY PAGE. Penambahan map boleh dilakukan secara manual dan gunakan Sygic Maps Downloader v.1.1 yang disediakan di bawah untuk memuat turun map.

Sygic Maps Downloader v.1.1 Dan Maps Terkini (2012.10)

Muat turun map terkini versi 2012.10 menggunakan Sygic Map Downloader v1.1 dari link yang saya sediakan di bawah, pastikan PC / laptop anda telah dilengkapi dengan fail .NET Frameworks 4.0 dan ke atas ;

• Download Sygic Map Downloader v1.1

1. Run aplikasi Sygic Map Downloader di PC
2. Download map yang dikehendaki
3. Pindahkan fail map seperti mys.2012.10 ke folder Sygic -> Maps (di phone) dan
4. JANGAN LUPA untuk menukarkan (edit) nama maps di content.info (rujuk panduan di bawah)

PENTING : Mengatasi Masalah No Maps Loaded Dan Penambahan Maps.

Besar kemungkinan, selepas menggunakan map terbaharu (2012.10) Sygic akan paparkan No Maps Loaded. Untuk mengatasi masalah ini, ikuti panduan yang saya sediakan di bawah dengan teliti. Langkah ini juga perlu dilakukan sekiranya anda menambah sebarang map yang berlainan.

1. Open fail Content.info menggunakan Notepad (Sygic -> Maps -> content.info)
2. Cari keyword map yang dikehendaki, Contoh untuk map Malaysia :TA:MYS:2012.09
3. Tukarkan dari TA:MYS:2012.09 ke TA:MYS:2012.10 (pastikan anda menukar kedua – duanya sekali)
4. Save
5. Pindahkan kembali fail content.info (yang telah di edit) ke Folder Sygic -> Maps (di phone)
6. Done!

Sample Screenshot

Landscape Mode

source

Android Jellybean 4.1.2 Test Firmware Untuk Galaxy Note N7000

Android Jellybean 4.1.2 Test Firmware Untuk Galaxy Note N7000 telah dikeluarkan. Ini merupakan berita yang cukup baik dan sememangnya dinanti – nantikan oleh pemilik Samsung Galaxy Note N7000. Kalau sebelum ini, pemilik Galaxy SII yang menerima Jellybean 4.1.2 pre-release firmware, kali ini sammobile telah mengeluarkan Android Jellybean 4.1.2 test-firmware untuk Galaxy Note N7000 pula (N7000XXLSA). Firmware N7000XXLSA ini merupakan versi Android Jellybean 4.1.2 pertama yang dikeluarkan untuk model Galaxy Note N7000. Justeru, menguatkan lagi anggapan bahawa officialJellybean firmware untuk model SII dan Note sudah semakin hampir.

Bacaan Tambahan : Segalanya Tentang Galaxy Note (N7000)

Screenshot Android Jellybean 4.1.2 Test Firmware Untuk Galaxy Note N7000
Kredit : http://www.sammobile.com/

NOTA : Firmware XXLSA ini masih di peringkat pembangunan (test firmware), dan kemungkinan wujud bug memang dijangkakan.

Android Jellybean 4.1.2 Test Firmware Details

• Test Firmware dan bukan official dari Kies
• Android : 4.1.2 Jellybean
• PDA : N7000XXLSA
• CSC : N7000OXALSA
• MODEM : N7000XXLSA
• Build : 20 November 2012
• Region : Europe
• Country : Germany
• DOWNLOAD : N7000XXLSA_N7000OXALSA_DBT.zip (1075.6MB)

Ciri – Ciri Android Jellybean 4.1.2 Test Firmware Untuk Galaxy Note N7000

• Buttery Smooth Performance & Great Stability (Project Butter)
• Multi-View (Multi Windows Multitasking, samseperti di Note II)
• Multi-View boleh disabled
• Page Buddy
• Notification Panel boleh customize
• Ciri baharu di Notification Panel
• Smart Rotation
• Continues Input in Samsung Keyboard (Swipe or Android 4.2 Keyboard)
• Samsung’s Cloud services
• Direct Call, Smart Stay and Pop-up Play Features
• Widgets baharu dari Galaxy S III
• 2 Home screen modes
• New Notifications bar
• Google Now

Cara – Cara Flash Android Jellybean 4.1.2 Test Firmware Untuk Galaxy Note N7000

Sekiranya anda berhasrat untuk mencuba firmware ini, ikuti langkah – langkah di bawah.

PERINGATAN : Mobilityworlds tidak akan bertanggungjawab di atas sebarang masalah yang timbul selepas mengikuti tutorial di bawah. Tutorial ini merupakan sebahagian daripada perkongsian maklumat dan risikonya adalah tanggungjawab anda sendiri.

NOTA : Lakukan backup data – data penting dari smartphone sebelum mengikuti prosedur di bawah. Proses flashing firmware ini akan memadamkan keseluruhan data (full wipe).

• Muat turun Odin 3.04 (extract)
• Muat turun firmware XXLSA (extract) – terdiri daripada beberapa file.

1. Start Odin 3.04 di PC / laptop
2. Restart phone ke Download Mode (HOME + POWER + VOLUME DOWN)
3. Sambungkan phone ke PC / laptop menggunakan USB cable dan tunggu sehingga Odin mengenal pasti phone anda
4. Di PDA – pilih CODE_N7000XXLSA_549786_REV02_user_low_ship.tar.md5
5. Di PHONE – pilih MODEM_N7000XXLSA_REV_05_CL1222228.tar.md5
6. Di CSC – pilih CSC_OXA_N7000OXALSA_549786_REV02_user_low_ship.tar.md5
7. Pastikan Re-Partition TIDAK di TICK
8. Tekan button Start, dan tunggu sehingga selesai.

Odin 3.04

sumber

Android Jellybean 4.1.2 Pre-Release Firmware Untuk Galaxy SII

Berita baik untuk pemilik Samsung Galaxy SII (GT-I9100) international version. Android Jellybean 4.1.2 Pre-Release Firmware Untuk Galaxy SII telah dikeluarkan oleh izap (xda member) dan samfmobile.com. Berdasarkan respon yang diberikan oleh pengguna, saya dapati firmware tersebut sudah cukup stabil untuk diguna pakai. Kewujudan firmware ini sedikit sebanyak memberikan gambaran bahawa Android Jellybean official firmware untuk Galaxy SII bakal dikeluarkan tidak lama lagi.

Screenshot Android Jellybean 4.1.2 Pre-Release Firmware Untuk Galaxy SII

Kredit : http://www.sammobile.com/

NOTA : Firmware XXLSJ ini masih lagi di peringkat pre-release dan kemungkinan wujud bug adalah dijangkakan.

Android Jellybean 4.1.2 Pre-Release Firmware Details

• Pre-Release dan bukan official dari Kies
• Android : 4.1.2 Jellybean
• PDA : I9100XXLSJ
• CSC : I9100OXXLS1
• MODEM : I9100XXLS6
• Build : 6 November 2012
• DOWNLOAD : I9100XXLSJ_I9100OXXLS1_OXX.zip (530.9MB)

Ciri – Ciri Android Jellybean 4.1.2 Pre-Release Firmware Untuk Galaxy SII

• Buttery Smooth Performance & Great Stability ( Project Butter)
• New TouchWiz Nature UX (sama seperti Galaxy S III and Galaxy Note II)
• Samsung’s Cloud services
• Direct Call, Smart Stay and Pop-up Play
• Widgets baharu seperti Galaxy S III
• 2 Home screen modes
• New Notifications bar
• Google Now

Cara – Cara Flash Android Jellybean 4.1.2 Pre-Release Firmware Untuk Galaxy SII

Sekiranya anda berhasrat untuk mencuba firmware ini, ikuti langkah – langkah di bawah.

PERINGATAN : Mobilityworlds tidak akan bertanggungjawab di atas sebarang masalah yang timbul selepas mengikuti tutorial di bawah. Tutorial ini merupakan sebahagian daripada perkongsian maklumat dan risikonya adalah tanggungjawab anda sendiri.

NOTA : Lakukan backup data – data penting dari smartphone sebelum mengikuti prosedur di bawah. Proses flashing firmware ini akan memadamkan keseluruhan data (full wipe).

• Muat turun Odin 3.04 (extract)
• Muat turun firmware XXLSJ (extract) – terdiri daripada beberapa file.

1. Start Odin 3.04 di PC / laptop
2. Restart phone ke Download Mode (HOME + POWER + VOLUME DOWN)
3. Sambungkan phone ke PC / laptop menggunakan USB cable dan tunggu sehingga Odin mengenal pasti phone anda
4. Di PDA – pilih CODE_I9100XXLSJ.tar
5. Di PHONE – pilih MODEM_I9100XXLS6.tar
6. Di CSC – pilih CSC_HOME_OXX_I9100OXXLS1.tar
7. Pastikan Re-Partition TIDAK di TICK
8. Tekan button Start, dan tunggu sehingga selesai.

Odin 3.04

Video

sumber

Cara-cara untuk delete Virus Shortcut Directly Using CMD

Pertama sekali, anda perlu memastikan computer yang anda ingin gunakan mempunyai anti-virus untuk mengelakkan virus tersebut masuk kedalam komputer sekiranya anda tersilap langkah, buat masa ini, avast free edition mampu untuk stop attack daripada virus shortcut mahupun folder. anda boleh mendownload avast free edition disini(open in new window).

berikut adalah step-step yang anda boleh gunakan untuk solve this particular problem easily.
step 

1, masukkan thumdrive anda ke komputer anda, pastikan anda hold key shift ketika anda sedang memasukkan thumdrive anda. 

2. setelah anda memasukkan thumdrive anda, tekan start menu - all programs - accessories - command prompt (windows vista/7) ataupun hanya taip CMD pada search bar di start menu anda.

3. dialog command prompt akan keluar, anda hanya perlu menaip latter thumdrive anda, sebagai contoh, latter thumdrive yang anda masukkan tadi ialah F, jadi anda perlu taip F: kedalam CMD. 

4. kemudian masukkan command yang diberikan dibawah
del *.lnk       // LNK tau, bukan ink, tulis dalam huruf kecil.lepas tue hit enter key, Command ini untuk delete semua shortcut yang ada.
attrib -s -h /s /d       //Seperti previous post, command ini untuk unhide semua file dan folder.
del autorun.inf       //virus shortcut akan menggunakan autorun ini untuk automatically run apabila thumdrive dimasukkan.

setelah itu, anda telah berjaya menyelesaikan masalah virus shortcut anda, tugas terakhir yang anda perlu lakukan ialah

5.  delete program virus tersebut! paling penting bagi mengelakan gejala yang sama berulang, untuk mengenali program virus tersebut, berikut adalah klu-klunya.
     5.1 mempunyai nama yang aneh dan tidak tersusun seperti assbtez dan sebagainya, nama adalah berbeza bagi setiap thumdrive yang berbeza, sekiranya anda masukkan thumdrive lain yang terkena virus ini, namanya pasti akan berbeza.
    5.2 mempunyai icon seperti ini

mungkin virus ini dibuat mengunakan VB atau creator virus ini like VB too much

    5.3 ada 2 program, pastikan delete kedua-duanya, kedua-duanya mempunyai nama yang berbeza, persamaan antara mereka ialah icon yang sama :)

6. selesai, thumdrive anda telah berjaya dibersihkan.

*sila comment untuk mendapatkan reaksi anda, adalah dibenarkan untuk anda distribute tutorial diatas. kalau boleh, sertakan link ke blog ini :).
**nantikan tutorial untuk mendelete virus shortcut didalam computer tanpa perlu memformatnya. 
***kebaikan menggunakan CMD ialah, shorcut dibuang secara terus tanpa masuk kedalam recycle bin.jangan lupe clearkan recycle bin anda selepas buat tutorial ini.

Cara Nak Lajukan Broadband Yang Sudah Limit

Kali ni aku nak bagi tips mcm mana nak lajukan broadband korang (digi, celcom, maxis) yang sudah limit/bandwidth dia dah melebihi had yang dah ditetapkan…
1. Pastikan korang connect ke internet melalui modem tu mcm biasa.
2. Untuk Windows XP, klik START dan pastu ambik RUN. Taip CMD dan tekan ENTER. Untuk pengguna Windows Vista / 7, jika takde RUN kat situ, ambik search RUN dan terus tekan ENTERatau terus taip CMD kat situ dan terus tekan ENTER.
Atau anda boleh gunakan altenatif lain dengan menekan butang START > PROGRAMS > ACCESSORIES > COMMAND PROMPT .
3. Selepas tu akan kuar kotak hitam mcm ni.



4. Pastu, taip jerk command ni kat situ. IPCONFIG/ALL  dan tekan ENTER. Dan paparan lebih kurang mcm ni akan keluar.



5. Bila keluar senarai connection mcm gambar kat atas ni, cari hardware modem broadband anda dan ambik IP address dia @ default gateway dia punya IP.
6. Lepas tu, ping IP address yang korang pilih. contohnya mcm nih. taip jerk ping 10.175.53.131 -t dan tekan ENTER. Bila berjaya, korang akan trima balasan mcm kt bwh. Kalo x kuar mcm kt bwh mksudnya x berjaya la tu…



7. Biarkan benda ni running sampai korang dah tak nak guna internet dah. pastu tutup jerkk mcm beser ngan tanda pangkah kat hujung tu.
Proses nie akan buat korang akan sntiasa ada connection dgn server, akan cepatkan proses hantar & terima packet (bdk2 network n IT tau la apa bnda nie) jadi website lbih cepat loading…
Tips ini boleh digunakan untuk semua jenis rangkaian seperti celcom, digi, maxis dan sebagainya..